CNC Milling
Precision CNC milling for housings, plates, brackets and complex profiles in metal and plastic, from a single prototype to repeat production batches.
Capabilities
Manufacturing capabilities, process by process
Machining, sheet metal fabrication, finishing and inspection are planned as one sequence. Open a capability to see the processes, tolerances and materials behind it.
01 · 5 processes
CNC Machining
3, 4 and 5-axis CNC milling and CNC turning for metal and plastic parts, from one-off prototypes to low-volume production runs.
CNC Turning
CNC turning for shafts, bushings, fittings, spacers and turned-to-milled parts with concentric tolerances held in a single setup.
3-Axis CNC Machining
Three-axis machining for prismatic parts — plates, brackets, covers and pockets — with the fastest cycle times and the most predictable cost.
4-Axis CNC Machining
Four-axis machining that adds rotary positioning to milling, so several faces of a part are cut in one setup with tighter alignment between them.
5-Axis CNC Machining
Simultaneous five-axis machining for impellers, blades, sculpted surfaces and complex parts that cannot be reached or finished accurately in three axes.
02 · 4 processes
Sheet Metal Fabrication
Laser cutting, bending, welding and assembly for enclosures, brackets, panels and frames in prototype and batch quantities.
Laser Cutting
Fibre laser cutting for steel, stainless steel and aluminium sheet — clean edges, tight nesting and fast turnaround for prototypes and batch parts.
Sheet Metal Bending
Press brake bending with matched tooling for enclosures, brackets, chassis and panels, holding angles and bend positions to drawing.
Sheet Metal Welding
MIG and TIG welding for frames, brackets and enclosures, with weld dressing and distortion control on visible and load-bearing joints.
Sheet Metal Assembly
Hardware insertion, riveting, bonding and light mechanical assembly so fabricated parts arrive as kits that are ready to install.
03 · 5 processes
Surface Finishing
Anodizing, powder coating, plating, polishing and painting to deliver the appearance, corrosion resistance and wear performance your part needs.
Anodizing
Clear, black and coloured anodizing for aluminium parts — corrosion resistance and wear performance in a finish that still looks like metal.
Powder Coating
Durable powder coating in RAL and custom colours with control over gloss, texture and film thickness for steel and aluminium parts.
Polishing & Deburring
Deburring, bead blasting, brushing and mirror polishing to set the final surface appearance of machined and fabricated parts.
Plating
Zinc, nickel, chrome and electroless nickel plating for corrosion protection, wear resistance, conductivity and appearance.
Painting & Silk Screening
Liquid painting, primer systems, clear coats and silk-screened graphics for parts where appearance, colour accuracy or printed identification matters.
04 · 3 processes
Quality
Inspection equipment, documented inspection plans and production control that keep delivered parts inside the drawing.
Equipment
The machining, fabrication, finishing and inspection equipment behind our published capability — and what each machine is best used for.
Inspection
Dimensional inspection by CMM, optical measurement and calibrated instruments, reported against your drawing so the numbers are verifiable.
Quality Control
The process controls behind consistent parts: inspection planning, in-process checks, non-conformance handling and corrective action.
Start a project
Tell us which process you need
Send your drawing with material, tolerance and finish. We will confirm the process, the lead time and any design questions before quoting.